ANEP Emergency phone, remote monitoring
and accessibility for lifts

Accessories

  • ALIM-CONTROL-2

    ALIM-CONTROL-2

    Alimentation 220-12Vcc secourue et contrôlée pour gamme téléalarmes ANEP BOX. Batterie Pb 12V...

  • CIRCUIT SATURNE II-E avec connecteurs

    CIRCUIT SATURNE II-E avec connecteurs

    inputs and outputs circuit for VIGILE SERVICE II, equipped with connectors.

  • FT 4004 (Cable included)

    FT 4004 (Cable included)

    Alarm reception modem. Interface between PC and analog. line. 4 input lines and 4 output lines.

  • FT 4004

    FT 4004

    Standalone, without cable.

  • FT 1000 (Cable included)

    FT 1000 (Cable included)

    Alarm reception modem. Interface between PC and tel line. 1 input line and 1 output line.

  • FT 1000

    FT 1000

    FT 1000 (standalone, without cable)

  • Centrale ANEPcenter M6 (module mail)

    Centrale ANEPcenter M6 (module mail)

    Allows automic sending by mail of alarm and events form ANEPcenter central.

  • Centrale ANEPcenter M5 (licence supp. opérateur)

    Centrale ANEPcenter M5 (licence supp. opérateur)

    Optimizes ANEPcenter central network for use by one or more user(s) added(s).

  • Centrale ANEPcenter M4 (Planification)

    Centrale ANEPcenter M4 (Planification)

    Real-time management of working time to redirect emergency calls.

  • ANEPcenter M3 Central (calling & programing)

    ANEPcenter M3 Central (calling & programing)

    Installation call for settings consultation and remote programming equipment

  • ANEPcenter M2 Centrale (Viewing)

    ANEPcenter M2 Centrale (Viewing)

    Remote viewing of events and parameters of installations equipped with ANEP products.

  • ANEPcenter M1 Central (Reception/Administration)

    ANEPcenter M1 Central (Reception/Administration)

    Modular software to install on PC for administration of sites with ANEP products

  • PLUTON (PC Software for GALAXIE)

    PLUTON (PC Software for GALAXIE)

    Site programing software for Galaxie (Escalators)

  • TETHYS SOFTWARE

    TETHYS SOFTWARE

    Programing software for CALYPSO

  • HELIOS software for PC

    HELIOS software for PC

    Download HELIOS update

  • ETA-PC

    ETA-PC

    Programing software of ETA 2000 voice synthesis.

  • CASSANDRE PC

    CASSANDRE PC

    Software to put into service VIGILE SERVICE, VIGILE SERVICE II and VIGILE 2008

  • NO IMPELLERS KIT (AET:ETA) 20 FLOORS

    NO IMPELLERS KIT (AET:ETA) 20 FLOORS

    Finger magnetic sensor with bracket and magnet 20 max levels.

  • NC IMPELERS KIT (AET/ETA)

    NC IMPELERS KIT (AET/ETA)

    NC IMPELERS KIT (AET/ETA)

  • SET KIT NO 20 Nx (CALYPSO)

    SET KIT NO 20 Nx (CALYPSO)

    Registration and counting up to 20 levels for CALYPSO doors remote monitoring.

  • CABLE KIT N°2 - 10 Floors + contacts

    CABLE KIT N°2 - 10 Floors + contacts

    Includes sirens/flash, contacts for each car door and connection cables.

  • CABLE KIT N°1 - CALYPSO

    CABLE KIT N°1 - CALYPSO

    Includes whole cables with fixed length.

  • GEMINI CABLE KIT

    GEMINI CABLE KIT

    Includes cables for connection between GEMINI and controller, analogic line and power supply.

  • MERCURY CABLE KIT

    MERCURY CABLE KIT

    Includes connection cables between MERCURY and controller, analogic line and power supply.

  • PANDORA

    PANDORA

    Extension module for remote monitoring VIGILE SERVICE II

  • CATEGORIES / PIT LINK KOMBO-F V10

    CATEGORIES / PIT LINK KOMBO-F V10

    Shielded connection cable between machine room and pit for KOMBO-F voice VIGILE SERVICE II.

  • PIT LINK KOMBO-F V10

    PIT LINK KOMBO-F V10

    Link between machine room and pit for KOMBO-F voice with remote monitoring Vigile Service II.

  • ZP kit/ Recal

    ZP kit/ Recal

    ZP kit /Reset for door zone detection and reset information.

  • Car door Information sensors kit for VIGILE SERVICE I & II

    Car door Information sensors kit for VIGILE SERVICE I & II

    Sensors, adjustable bracket and necessary fixing devices.

  • CABLE KIT N°1 to be used with ALLIANCE-VSII

    CABLE KIT N°1 to be used with ALLIANCE-VSII

    Neccessary when connection case ALLIANCE VSII is used in machine room.

  • BACK UP BATTERY ALIM-TMS, PHOENIX, VIGILE SERVICE
  • Power supply 12 Vcc TMS2002, TMS2004 et TITAN options

    Power supply 12 Vcc TMS2002, TMS2004 et TITAN options

    12 Vcc power supply for hand free telephone TMS2002, TMS2004 and TITAN options

  • POWER SUPPLY-PSU-12-12

    POWER SUPPLY-PSU-12-12

    Power supply 220/12Vcc for TITAN options

  • POWER SUPPLY-24 V-45

    POWER SUPPLY-24 V-45

    POWER SUPPLY-24 V 2A for PHOENIX, GEMINI and MERCURY

  • POWER SUPPLY-24 V-120

    POWER SUPPLY-24 V-120

    POWER SUPPLY-24 V 5A for PHOENIX, GEMINI and MERCURY

  • RS15 - 24 Power supply 24V 15 W

    RS15 - 24 Power supply 24V 15 W

    RS15 - 24 power supply 24V 15 W

  • Wiring kit N°1A

    Wiring kit N°1A

    Wiring kit N°1A to be used with ALLIANCE-VSII.

  • CABLE V2 -8m- (PANDORA)

    CABLE V2 -8m- (PANDORA)

    Link cable for PANDORA.

  • Travelling cable V4i >75m

    Travelling cable V4i >75m

    Shielded travelling cable > 75m for VIGILE SERVICE II

  • Travelling cable V4i -65m-

    Travelling cable V4i -65m-

    65m Shileded travelling cable for VIGILE SERVICE II

  • Travelling cable V4i -50m-

    Travelling cable V4i -50m-

    50m shieled travelling cable for VIGILE SERVICE II.

  • Travelling cable V4i -35m-

    Travelling cable V4i -35m-

    35m shielded travelling cable for VIGILE SERVICE II

  • Travelling cable V4i -25m-

    Travelling cable V4i -25m-

    Shielded travelling cable 25m for VIGILE SERVICE II

  • Link bus CABLE V6 >70m-

    Link bus CABLE V6 >70m-

    Link bus with length > 70 m between main and secondary modules.

  • LINK BUS CABLE V6 -70m-

    LINK BUS CABLE V6 -70m-

    Link bus with length > 70 m between main and secondary modules.

  • LINK BUS CABLE V6 -5m-

    LINK BUS CABLE V6 -5m-

    Link Bus with length > 5 m between main and secondary modules.

  • LINK BUS CABLE V6 -40m-

    LINK BUS CABLE V6 -40m-

    link bus with length > 40m betwwen main and secondary modules.

  • LINK BUS CABLE V6 -15m-

    LINK BUS CABLE V6 -15m-

    Link Bus with length > 15m betwwen main and secondary modules.

  • ALLIANCE-VSII (without connectors)

    ALLIANCE-VSII (without connectors)

    Connection interface between lift and remote monitoring.

  • ALLIANCE-VSII (with connectors)

    ALLIANCE-VSII (with connectors)

    Connection interface between lift and remote monitoring VIGILE SERVICE II.

  • ALLIANCE-TC (with cables)

    ALLIANCE-TC (with cables)

    Connection box on car roof.

  • ANEP BOX 12 to 16 floors TRAVELLING CABLE

    ANEP BOX 12 to 16 floors TRAVELLING CABLE

    ANEP Box Shielded 12 to 16 floors travelling cable P4 65m.

  • ANEP BOX 7 to 11 floors travelling cable

    ANEP BOX 7 to 11 floors travelling cable

    Shielded telephone travelling P4 50m (7 to 11 floors). 4x2x0.34mm² 50 METERS.

  • ANEP BOX 2 to 6 floors travelling cable.

    ANEP BOX 2 to 6 floors travelling cable.

    Shielded telephone travelling cable P4 35m (2 à 6 Floors) 4x2x0.34mm² 35 METERS.

  • Pit link cable with BOX-F (K-F) T10 > 60m

    Pit link cable with BOX-F (K-F) T10 > 60m

    Link cable between machine room and pit for Box F (KOMBO-F).

  • Pit Link cable with BOX-F (K-F) T10 -90m-

    Pit Link cable with BOX-F (K-F) T10 -90m-

    link cable between machine room and pit for BOX F voice module (KOMBO-F).

  • Pit link cable with BOX-F (K-F) T10 -65m-

    Pit link cable with BOX-F (K-F) T10 -65m-

    Link cable between machine room and pit for BOX-F voice module (KOMBO-F).

  • Pit link cable with BOX-F (K-F) T10 -60m-

    Pit link cable with BOX-F (K-F) T10 -60m-

    11 to 15 floors. Pit link cable between machine room and pit for BOX F voice module. (KOMBO-F)

  • Pit link cable with BOX-F (K-F) T10 -45m-

    Pit link cable with BOX-F (K-F) T10 -45m-

    6 to 10 standard floors. Link cable between machine room and pit for Box F voice module (Kombo F).

  • Pit link with Box-F (K-F) T10 -30m-

    Pit link with Box-F (K-F) T10 -30m-

    2 to 5 floors or low machine room. Link between machine room and pit for BOX -F (KOMBO-F)

  • Adapt. 266x166 INOX FACEPLATE 266x166

    Adapt. 266x166 INOX FACEPLATE 266x166

    Adaptation to replace a TMS by a TMX / MIDIS / LIGAN / EGIDE /TMX faceplate.

  • TMX Belt (Black)

    TMX Belt (Black)

    Adaptation belt to be surface mounted.

  • TMS Belt (Black)

    TMS Belt (Black)

    Adaptation belt to be surface mounted.

  • INDUCTIVE LOOP TEST TOOL

    INDUCTIVE LOOP TEST TOOL

    Autonom test tool checking inductive loop functionnality. Deliver with an helmet

  • REMOTE MICRO -6m- STICKER

    REMOTE MICRO -6m- STICKER

    REMOTE MICRO in cabin, sticker, cable length 6 m, for voices ANEP BOX and TITAN.

  • REMOTE MICRO -50cm-

    REMOTE MICRO -50cm-

    REMOTE MICRO inside cabin, sticker, cable length > 50m for voices ANEP BOX and TITAN.

  • REMOTE MICRO -2m50- STICKER

    REMOTE MICRO -2m50- STICKER

    REMOTE MICRO inside cabine, sticker, cable length 2,5m, for voices ANEP BOX and TITAN.

  • REMOTE MICRO -2m50- (tube termin)

    REMOTE MICRO -2m50- (tube termin)

    Remote Micro 2.50m (black) for cabin voice. ANEP Box & TITAN.

  • INOX FACEPLATE 200x100  thickness 1.5mm

    INOX FACEPLATE 200x100 thickness 1.5mm

    INOX FACEPLATE 200x100 thickness 1.5mm

  • INOX Adapt. Faceplate 540x180 thickness 2mm

    INOX Adapt. Faceplate 540x180 thickness 2mm

    MIDIS/LIGAN/EGIDE/TMX. Replacing a hand free phone. Ext. Dim. 540x180 - Int. Dim. 207x110

  • Adapt. Face 380x260 INOX thickness 2mm

    Adapt. Face 380x260 INOX thickness 2mm

    MIDIS/LIGAN/EGIDE/TMX. Replacing a hand free phone. Ext. Dim. 380x260 - Int. Dim. 207x110

  • INOX FACEPLATE 300x110 Thickness 2.5mm

    INOX FACEPLATE 300x110 Thickness 2.5mm

    Stainless steel finish FACEPLATE 300x110 Thickness 2.5mm

  • Adapt. Faceplace  350x220 INOX thickness 2mm

    Adapt. Faceplace 350x220 INOX thickness 2mm

    MIDIS/LIGAN/EGIDE/TMX. Replacing a hand free phone. Ext. Dim. 266x166 -- Int. Dim. 199x107

  • Adapt. Faceplate 350x190 INOX thickness 2mm

    Adapt. Faceplate 350x190 INOX thickness 2mm

    MIDIS/LIGAN/EGIDE/TMX. Replacing a hand free phone. Ext. Dim. 350x190 -- Int. Dim. 207x110

  • Adapt. Faceplate  340x170 INOX thickness 2mm

    Adapt. Faceplate 340x170 INOX thickness 2mm

    MIDIS/LIGAN/EGIDE/TMX. Replacing a hand free phone. Ext. Dim. 340x170 - Int. Dim. 207x105

  • Adapt. Faceplate 300x130 INOX thickness 2mm

    Adapt. Faceplate 300x130 INOX thickness 2mm

    MIDIS/LIGAN/EGIDE/TMX. Replacing a hand free phone. Ext. Dim. 300x130 -- Int. Dim. 207x110

  • Adapt. Faceplate 280x140 INOX thickness 2mm

    Adapt. Faceplate 280x140 INOX thickness 2mm

    Adaptation for MIDIS/LIGAN/EGIDE/TMX. Replacing a hand free phone.

  • Adapt. Faceplate 270x180 INOX thickness 2mm

    Adapt. Faceplate 270x180 INOX thickness 2mm

    MIDIS/LIGAN/EGIDE/TMX. Replacing a hand free phone. Ext. Dim. 270x180 -- Int. Dim. 207x105

  • Adapt. Faceplate 265x130 INOX thickness 1mm

    Adapt. Faceplate 265x130 INOX thickness 1mm

    MIDIS/LIGAN/EGIDE/TMX. replacing a hand free phone. Ext. Dim. 365x130 -- Int. Dim. 199x108

  • ANEP-J-CA-029 PLEXI WINDOW ENGLISH ANEP LOGO

    ANEP-J-CA-029 PLEXI WINDOW ENGLISH ANEP LOGO

    ANEP-J-CA-029 PLEXI WINDOW E:15/10 140 X 80 ENGLISH with ANEP logo

  • INDUCTIVE LOOP AMPLIFIER -pack-

    INDUCTIVE LOOP AMPLIFIER -pack-

    Inductive loop with amplifier allowing an autonomous functioning

  • SATURNE-E II (without connectors)

    SATURNE-E II (without connectors)

    SATURNE-E II (without connectors)

  • SATURNE II (without connector)

    SATURNE II (without connector)

    Secondary module not equipped with phone transmitter, to be installed in machine room.

  • SATURNE II (with connectors)

    SATURNE II (with connectors)

    Secondary module of Vigile Service II remote monitoring.

  • Accessories Pocket machine room VSII

    Accessories Pocket machine room VSII

    Fix devices and connections for VIGILE SERVICE II

  • VISU II-E CIRCUIT

    VISU II-E CIRCUIT

    View by inputs/outputs for remote monitoring VSII and SATURNE II.

  • ATLAS-E cms VSII CIRCUIT

    ATLAS-E cms VSII CIRCUIT

    Phone transmitter circuit for remote monitoring VIGILE SERVICE II.

  • Kit ZP/PO

    Kit ZP/PO

    Kit of information door zone and door opening for MERCURY and GEMINI.

  • ATLAS-E cms ULYSSE CIRCUIT

    ATLAS-E cms ULYSSE CIRCUIT

    ATLAS-E cms ULYSSE CIRCUIT

  • NC Impellers kit (AET/ETA)

    NC Impellers kit (AET/ETA)

    NC Impellers KIT (AET/ETA)

  • TITAN SIREN

    TITAN SIREN

    108 dB siren integrated in metal box. TITAN option or VIGILE SERVICE II.

  •  YELLOW / GREEN PICTOGRAMS FACEPLATE

    YELLOW / GREEN PICTOGRAMS FACEPLATE

    Stainless steel faceplate with Jellow/Green Pictograms.

  • Y/G pictograms faceplate - emergency lighting

    Y/G pictograms faceplate - emergency lighting

    Inox Faceplate equipped with yellow/Green pictograms and emergency lighting. For TITAN options

  • Y/G FACEPLATE AND ALARM BUTTON

    Y/G FACEPLATE AND ALARM BUTTON

    Inox faceplate with yellow/green pictograms and alarm button. For Titan options.

  • Inductive loop on car roof (TITAN Options)

    Inductive loop on car roof (TITAN Options)

    Allowing to receive amplify voice sound, thanks to a magnetic transmission.

  • FIREMAN SQUARE WINDOW 2x43x77mm

    FIREMAN SQUARE WINDOW 2x43x77mm

    FIREMAN SQUARE WINDOW 2x43x77mm

  • Pocket N°3 - BOX F Accessoires

    Pocket N°3 - BOX F Accessoires

    Pocket N°3 - BOX F Accessoires with 50 m cables.

  • INDUCTIVE LOOP FACEPLATE

    INDUCTIVE LOOP FACEPLATE

    Standardized faceplate indicating a magnetic loop presence.

  • CAR INSTRUCTIONS FACEPLATE - Accessories pocket

    CAR INSTRUCTIONS FACEPLATE - Accessories pocket

    Containing necessary material to fix the modul.

  • INSTRUCTIONS PLATE -LEXAN

    INSTRUCTIONS PLATE -LEXAN

    Fixing with sticker 140x80mm - indicates to users how to use car alarm.

  • INSTRUCTIONS PLATE - INOX

    INSTRUCTIONS PLATE - INOX

    LIFT Instruction stainless steel finish plate 10/10 - 140X80 CHEMICAL BURN.

  • Flooding detection pack

    Flooding detection pack

    Flooding detection pack to connect with Box F.

  • KIT ADAPTATEUR Y RJ12 ET RJ45 2 CABLES 5M

    KIT ADAPTATEUR Y RJ12 ET RJ45 2 CABLES 5M

    Adaptation kit Y RJ12 AND RJ45 ,2 CABLES 5 mto double faceplate and ANEP voice.

  • BOX Cable/DMG D67 Display

    BOX Cable/DMG D67 Display

    CABLE 4 X 0.25 L. 2.5 Meters - BOX/DMG D67 Display for Yellow/Green Pictograms

  • ALARM BUTTON YELLOW/GREEN PICTOGRAMS and CABLES

    ALARM BUTTON YELLOW/GREEN PICTOGRAMS and CABLES

    BP-AL.PICTO.JAUNE/VERT et CORDONS

  • Fireman square 60X260 BOX Module

    Fireman square 60X260 BOX Module

    Fireman square 60X260 BOX Module

  • Fireman square 140X310 BOX Module

    Fireman square 140X310 BOX Module

    Fireman square 140X310 BOX Module

  • Fireman square 110X310 BOX Module

    Fireman square 110X310 BOX Module

    Fireman square 110X310 BOX Module

  • BOX ENVOIS (ANEP BOX TX +)

    BOX ENVOIS (ANEP BOX TX +)

    Circuit to move lift on upon car order. To be placed behind C.O.P.

  • MULTIPULS case pour BOX et AET

    MULTIPULS case pour BOX et AET

    Allowing to connect car positon impellers with ANEP BOx and car AET display.

  • BOX DISCRI

    BOX DISCRI

    Modude allowing to filter false car alarm, designed for ANEP BOX.

  • BOX ALIM CONTROL

    BOX ALIM CONTROL

    Power supply control, with cables.

  • BOX / Kit Position (10 FLOORS NO)

    BOX / Kit Position (10 FLOORS NO)

    2 NO impellers kit, to connect with ANEP BOX do determine car position.

  • BOX / Car door kit (PO/PF)

    BOX / Car door kit (PO/PF)

    2 impellers to be connected on ANEP BOX TX for car door position (open or close).

  • BOX / 4 impellers kit (10 Floors)

    BOX / 4 impellers kit (10 Floors)

    4 impellers kit for BOX TX & ALTO, to determine lift and door positions.

  • BOX / ALIM TX back up 230 / 9v (with cables)

    BOX / ALIM TX back up 230 / 9v (with cables)

    Emergency power for Yellow/Green pictograms and Inductive loop (with connection cables)

  • ACCESSORIES POCKET FOR BOX ON CAR ROOF

    ACCESSORIES POCKET FOR BOX ON CAR ROOF

    Accessories pocket for ANEP BOX installation on car roof

  • Y RJ45 DOUBLE-VOICES ADAPTOR AND BOX-ENVOIS

    Y RJ45 DOUBLE-VOICES ADAPTOR AND BOX-ENVOIS

    Two voices splitting for 2x RJ45 (supplied with 10cm cable) - for BOX-ENVOIS.

  • Any question?